A modern, multi-purpose disinfectant product that eliminates bacteria and algae, enables the flocculation of dirt and stabilizes active chlorine.

Use biocides in a safe manner. Always read the label and product information before use.

Instructions

Before using the product for the first time, always adjust the pH value to 6.8 - 7.6. Perform an initial shock disinfection of the water with Cranit chlorine shock. Dose the tablets with a collector (skimmer), float or other dispenser with the filter device switched on. It is necessary to maintain the content of active chlorine in the range of 0.3 - 0.8 mg/l and pH 6.8 - 7.6. Check the chlorine content and pH value once a week using testers (Cranit tester for pools 4 in 1).

Dosage

Depending on the water temperature, add 1-2 tablets (200-400 g) per 30 m³ (30,000 liters) of water every 6-8 days, 1 tablet at temperatures up to 25 °C, 2 tablets above 25 °C.

Warning

NEVER THROW THE TABLETS DIRECTLY INTO THE POOL! Direct contact of the tablet with the film may cause it to turn white. The preparation is basically added to the water and not the other way around! We are not responsible for damages caused by improper use of the product.

Hazard identification

Signal word: DANGER

H272 May intensify fire; oxidant.